Oscam Config Creator Latest Version

Oscam Config Creator Latest Version

Catseye Enigma2 Settings 68.5 East - 61.0 West

Download Latest Catseye Enigma2 Settings

Easy install of oscam on Enigma2 ( mips-tuxbox ) based STB .

More info at this link ~ Easy install of oscam on Enigma2 ( mips-tuxbox ) based STB .

[TUTORIAL] Easy install of OScam on Enigma2 (mips-tuxbox) based STB without the need of any third party plugin or SoftCam Manager pre-installed.

Goal:

Install OSCam on a STB running Enigma2 (mips-tuxbox plateform) without the need of another plugin or a softcam manager.

This way of working should work for almost any E2 image, there will be no integration with any SoftCam Manager but we will install a very good plugin dedicated to OScam, which will allows you to control the OScam status and even restart it: OScamStatus.

Pre-requisite:

- a linux Enigma2 based STB on which you can run OScam in its mips-tuxbox version (to be able to use the pack like it is)
- your stb should have an internal card reader referenced by /dev/sci0
- being able to connect to your STB in telnet and FTP (with DCC or any other program)
- being able to follow and type some simple commands or being able to do cut and paste :-)
- we consider that your STB has no other running softcam before following this tutorial (typically on a brand new E2 image installation). If another softcam is running, it can prevent OScam from running properly.

Installation:

Take the pack attached to this tutorial (easy-oscam.tgz).
Transfer the pack in the folder /tmp of your E2 STB by FTP.

Connect via telnet and type the following commands (or even better make cut and paste) the cd / at the very beginning is really important don't skip it:

Code:

cd /

Code:

tar -xvzf /tmp/easy-oscam.tgz

Code:

/tmp/oscam-install.sh

Your STB will make a full reboot.

Now you have:

- OScam installed on your STB in the folder /usr/bin and the configuration files are in /var/tuxbox/config
- OScam will autostart when you reboot your STB.
- OScam is active in dvbapi mode so it is self sufficien, no need for any other softcam to run.
- The web interface of OScam is accessible from http://ip_address_of_receiver:16001 (Login: username password: password)
- The internal card reader /dev/sci0 is enabled
- The plugin Oscam Status release 0.41-r0 is installed

With the plugin OScam Status you can control the status and even restart your OScam, no need to any SoftCam Manager integration specific for each image.
It should appears in your Plugins list. If you change the login / password of the OScam webif, don't forget to change it too in the Oscam Status plugin otherwhise it won't work anymore.

Good to know:

The OScam executable is installed into the folder /usr/bin
The OScam configuration files are placed into the folder /var/tuxbox/config

If you want to test a newer version of OScam you just need to:

- Copy the new executable version (we will call it: The_New_Name_of_the_new_version) into the /usr/bin folder.

Go in telnet and type:

Code:

cd /usr/bin

Code:

killall oscam

Code:

rm oscam

Code:

ln -s  The_New_Name_of_the_new_version oscam

Code:

chmod 755 oscam

Code:

sync

Code:

sync

Code:

reboot -f

Thanks to PR2 from oscam.to forum

How To: Vu+ SOLO Boot Loader Upgrade

How To: Vu+ SOLO Boot Loader Upgrade

The CFE image of Vu+ Solo is updated.

The main difference from the old one is supporting the large size image more than 48MB.

Please see the detailed explanation of update as below.

Unzip the solo_cfe_2.0_usb.zip to USB stick. (There should be /vuplus/solo/cfe_cfe_auto.bin)
Insert USB stick into the USB port of solo and power on the box.
It takes just a few secs to update.
If solo's front led blinks continuously, restart box.

To proceed with image update, you should delete the cfe_cfe_auto.bin at /vuplus/solo in USB stick once bootloader update is finished.

LCD skins VUplus Ultimo

LCD skins VUplus Ultimo

Heres my skin_user.xml mod!

If a picon exists for a channel, it is displayed....if there is no picon then just the text for the channel name is displayed,

I've removed the clock and increased the length of the program name to avoid clipping and scrolling!

WIP of course! just replace the skin_user.xml file in /etc/enigma2/ and picon_default.png in your piconlcd path!

How to setup an Enigma2 Box with VBox II DiSEqC 1.2 Positioner.

How to setup an Enigma2 Box with VBox II DiSEqC 1.2 Positioner.

How to setup Vu+ with VBox II DiSEqC 1.2 Positioner.

If your VBox II already has the satellite positions stored and your changing from an old receiver to Vu+ then follow this procedure.

Write down your VBox II satellite position numbers. These are the numbers displayed on the front of the VBox II when moving to a
specific satellite position. These position numbers can also be found in your old receivers motor setup menu.

Example lets say...
Position 1 on VBox II = Astra 19e
Position 2 on VBox II = Eutelsat W2 16e
Position 3 on VBox II = Hotbird 13e

You get the idea...

First send the dish to Astra 19e using Vbox II.

On Vu+ Remote Press Menu
Select Setup Press OK
Select Service Searching Press OK
Select Tuner configuration Press OK
Select Tuner A Press OK

Now set Configuration Mode to Advanced. Use Left or Right keys on remote to select.

Code:

Configuration Mode: Advanced Satellite: Astra 19e LNB: 1 DiSEqC mode: 1.2

Scroll down to botton of the page with the down arrow on remote.

Stored position: 001

Press OK to store.

OK that's Astra 19e setup now to setup Eutelsat W2 16e

Now send the dish to Eutelsat 16E using Vbox II.

Select Setup Press OK
Select Service Searching Press OK
Select Tuner configuration Press OK
Select Tuner A Press OK

Code:

Configuration Mode: Advanced Satellite: Eutelsat W2 16e LNB: 2 DiSEqC mode: 1.2

Scroll down to botton of the page with the down arrow on remote.

Stored position: 002

Press OK to store.

OK that's Eutelsat W2 16e setup now to setup Hotbird 13e

Now send dish to Hotbird using Vbox II

Select Setup Press OK
Select Service Searching Press OK
Select Tuner configuration Press OK
Select Tuner A Press OK

Code:

Configuration Mode: Advanced Satellite: Hotbird 13e LNB: 3 DiSEqC mode: 1.2

Scroll down to botton of the page with the down arrow on remote.

Stored position: 003

Press OK to store.

You get the idea, now repeat for the rest of the satellites and your done.

This is enough to get you started, the fun starts learning the rest.

Duolabs QBox HD Mini Addons Servers

Duolabs QBox HD Mini Addons Servers

A very rich ADDON repository including OSCam and always the latest Skins , Plugins and Personalizationations !